Ref: D61B
PRICED AT £196.06
inc VAT £235.27
Delivery on this item is free
6L Water Heater. Piezo ignition.
The water heater does not include flue or fitting kit. This water heater has remained virtually unchanged since its introduction in 1990 when it was designated the D51B. It has been a favorite with many Caravan Holiday Home Manufactures, and is an industry benchmark for reliability and performance.
It gives a flowrate of 6 litres per minute at a temperature rise of 25 degrees celsius above ambient. Maximum power input is 11KW. It requires a minimum operating pressure of 1Bar and must be connected to a conventional Flue. For full installation requirements, please see the User manual in the manuals section of this website.
D61B Components
Related Items
Ref: FTFCT
Flue ceiling trim (D61B/E)
PRICED AT £7.27
inc vat £8.72
add to basket »
Ref: FW0400
FITTING KIT D61B/E (FW0370, 380 & 390)
PRICED AT £5.25
inc vat £6.30
add to basket »
Ref: FW0391
Swivel ISV 3/4 X 15mm
PRICED AT £9.85
inc vat £11.82
add to basket »
Ref: FW0392
Swivel ISV 3/4 X 10mm
PRICED AT £9.85
inc vat £11.82
add to basket »
Ref: FTMO38
Complete Flue Conversion Kit (D61B/E)
PRICED AT £44.44
inc vat £53.33
add to basket »
Ref: FTFT250
Flue Terminal 250mm tall (D61B/E)
PRICED AT £32.04
inc vat £38.45
add to basket »
Ref: FTPWDS420
Flue Pipe Double Skin 420mm White D61B/E
PRICED AT £17.75
inc vat £21.30
add to basket »
Ref: FTFP600
Flue Terminal Pipe 600mm x 90mm
PRICED AT £11.26
inc vat £13.51
add to basket »
Ref: FW0591
This kit can be used to convert D51/61 LPG water heaters to operate on UK natural gas.
PRICED AT £14.01
inc vat £16.81
add to basket »
Ref: FW0403
ISV 10mm FITTING KIT D61B/E. When fitting a water heater BS5482 pt 2 and EN 1949 should be complied with. This stipulates that a gas isolation valve should be fitted on the gas supply pipe. This kit fulfils this requirement.
PRICED AT £10.50
inc vat £12.60
add to basket »
Ref: FW0402
ISV 15mm FITTING KIT D61B/E. When fitting a water heater BS5482 pt 2 and EN 1949 should be complied with. This stipulates that a gas isolation valve should be fitted on the gas supply pipe. This kit fulfils this requirement.
PRICED AT £10.50
inc vat £12.60
add to basket »
All prices shown on this website are in GBP Sterling (£). For any orders from outside the UK please contact Morco Products Ltd for a quote.
Registered Address: Morco Products Ltd, Morco House, Riverview Road, Beverley, East Yorkshire, HU17 0LD
Sales Hotline - 01482 325456
Fax Hotline - 01482 212869